CF-1W ShieldPins for Pinlock®Original InsertLens are installedCF-1W Mirror ShieldPins for Pinlock® Original Insert Lens are installedClearUIC Clear (standard)Medium SmokeSmokeBlackBreath Guard ProDark Silver Mirror *1Blue Mirror *1Silver Mirror *1Gold Mirror *1Blue MirrorSilver MirrorCF-3 Inner SunshadeCF-3 MirrorInner SunshadeCF-1W Pinlock®Original Insert Lens *2Smoke (standard)Clear*2 Exclusive to [CF-1W] and [CF-1W UIC] shields. Not suitable for [CF-1P] shield for KAMUI*1 DO NOT use tinted shield with tinted inner sunshade. This will cause poor sight and it is very dangerous.CF-1W UIC ShieldPins for Pinlock®Original InsertLens are installedFog resistant sheetPinlock Pin setPinlock Pin x 1setUV & IR CUT SHIELDUICKAMUI-3 Series Optional PartsKAMUI-3 Chin VentilationEach single colorKAMUI-3 Head VentilationEach color / leftEach color / rightKAMUI-3 Rear VentilationEach single colorBreath Guard No.9Wind Shutter No.4KAMUI-3 Inner PadXS（21mm）/ S（18mm）/M（12mm）/ L（15mm）/XL（12mm）/ Option（9mm）KAMUI-3 Cheek Pads Set40mm（XS）/ 35mm（Common in S･L）/ 30mm（Common in M･XL）/ 25mm（Option）/ 20mm（Option）Ear Cap set No.1Common in all sizesEar Cap set (L/R) x 1 setKAMUI-3 Chinstrap Cover setCommon in all sizesShield Ratchet Screw set6x6 screw x 4pcsCF-1 Shield Ratchet setC-1K Ratchet(L/R) x 1set6x6 screw x 4pcsKAMUI-3 Series Replacement Parts*Repair at factory: This model has some parts only available for repair at factory. Please check “Repair Parts List” on page 44.（PAT.No.4311691）Wake Stabilizer (PAT.)Kabuto’s technology: Controls the air around the helmet and decreases the pressure to the rider.COOLMAX® and Fully Detachable and Washable Interior PadsCOOLMAX® material is used for the areas where your skin touches. Interior pads are fully detachable and washable.Wind Shutter No.4Reduce air incursions in from underneath chin. Detachable depending on a season and purpose.16Kabuto 2025 FULL FACEFULL FACESYSTEMOPEN FACE ACCESSORIESLISTOFF ROAD
元のページ ../index.html#17